surface mounted LED spotlight - brass

Name: surface mounted LED spotlight - brass surface mounted LED spotlight - brass
Availability: InStock

ablette.go.001

$70.91

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Ablette, a ceiling lamp 100% zangra
This zangra ceiling spotlight is called Ablette. This adjustable ceiling light can be installed in the middle of a room or close to a wall if you wish to illuminate an element of decoration or architecture. Ablette is available in three colours: raw brass, white and black, and two models: with a single spotlight or two adjustable spotlights. This adjustable light fitting is designed and manufactured in Europe. It is durable and complies with European regulations. This surface-mounted spotlight takes a GU10 bulb.
Ideal in a contemporary living room or bedroom.

Gold in your home?

The colour gold is a stylish colour that immediately gives your interior a feeling of richness. Gold, just like silver, basically works with any other colour. Combined with black, the room suddenly becomes very chic, while the combination of gold with white provides a more modern look. If you combine gold with pink, you get a Scandinavian atmosphere. Your imagination is the limit!

What are the properties of brass?

Brass is an alloy consisting predominantly of zinc and copper. Brass is significantly more yellow than pure copper and bronze. It is a material that has always been appreciated for its resistance and its colour close to that of gold.
Brass resists moisture and does not rust, and is easy to maintain. Over time, the glossy surface will tend to oxidize naturally and become verdigris (greyish-green). This is a natural process of brass ageing and does not constitute grounds for complaint or is something covered by the warranty.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What is a GU10 light bulb?

A GU10 light bulb is designed for GU10 or GZ10 fittings. These light bulbs are commonly used for spotlights. The GU10 light bulb employs a twist-and-lock system, called Bi-Pin, which consists of two prongs spaced 10 mm apart. U means "Universal". They operate at 230 volts without the need for a transformer or a driver. If your light bulb is dimmable, you will be able to adjust the brightness at all time. It’s designed to fit snugly into place with just a push and a clockwise twist.
Here you will find a GU10 light source, if you would like to buy one!

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Code	ablette.go.001
EAN code	5415249065966
Height	13 cm
Width	7 cm
Origin	Europe
Marking	CE
Lamp holder type	GU10
Wattage	max 10W LED
Voltage	AC 230 V
Frequency	~ 50/60 Hz
Protection marking	IP20
Safety class	Class 1
Interaxial distance	3 cm
Dimensions wall or ceiling rose	Ø 7 cm x 2 cm
Fixation screws included	no
Type of luminaire	Ceiling light
Lightbulb included	No
Assembly instructions
Protection's indice