brass wall light

Name: brass wall light brass wall light
Availability: InStock

light.160.go.002

€131.00

ZANGRA SAYS TECHNICAL DESCRIPTION

Traditional brass and glass marine wall light
A great classic of industrial design, this sumptuous brass wall lamp is enhanced by a frosted glass shade and a grid.
This lamp is made in an artisanal workshop in Europe, which has specialised in the production of lamps for boats for over fifty years. Their models are tough and durable.
Please note: this wall lamp is not suitable for outdoor use.
This lamp must be fitted with an E27 bulb.

What are the properties of brass?

Brass is an alloy consisting predominantly of zinc and copper. Brass is significantly more yellow than pure copper and bronze. It is a material that has always been appreciated for its resistance and its colour close to that of gold.
Brass resists moisture and does not rust, and is easy to maintain. Over time, the glossy surface will tend to oxidize naturally and become verdigris (greyish-green). This is a natural process of brass ageing and does not constitute grounds for complaint or is something covered by the warranty.

Glass: a sustainable and recyclable material

At zangra, we believe that glass should be re-inserted into our daily lives to replace plastic. Glass plays an essential role in preserving our environment. Its responsible use and sustainable life cycle make it a valuable ally in the fight to protect the ecology. One of the most commendable features of glass is its ability to be recycled almost indefinitely. Unlike other materials that lose their properties during recycling, glass can be melted and remoulded several times without altering its quality. This reduces demand for natural resources, saves energy and minimises waste.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

Are the screws included?

No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

SKU	light.160.go.002
EAN code	5415249052539
Material	Brass / Glass
Colour	Brass / Frosted
Height	33 cm
Depth	17 cm
Diameter	Ø 11 cm
Origin	Europe
Marking	CE
Lamp holder type	E27
Wattage	max 70 W
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP20
Safety class	Class 1
Interaxial distance	7 cm
Fixation screws included	no
Type of luminaire	Wall light
Lightbulb included	No
Installation instructions
Protection's indice