Stylish and modern blown glass ceiling light | zangra

bathroom blown glass wall or ceiling light - 38cm - IP44

light.o.106.w.001
€192.98
x
x
- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION

Blown glass mirror lamp

This blown glass lamp diffuses a soft light with its velvety shade and is ideal for lighting bathroom mirrors.
The glass shades are crafted by the glass blowers in a traditional European glass factory.
Once the glass has been blown into its final shape, by means of a blowpipe and iron moulds, it is placed into an annealing oven, controlling its cooling down to prevent any cracking.

The lamp is made of Triplex blown glass with a matte finish.
It has two E14 sockets and must be fitted with two E14 bulbs.


What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.


What does IP44 mean?

IP44 means that this lamp is protected against:
4 : a solid object greater than 1mm.
4 : water splashes from all directions.
Indoor: rated for installation in bathroom zones 2 and 3.
Outdoor: suitable for outdoor use if correctly installed in zone 3 and 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E14 mean?

E14 stands for the type of the fitting of a lamp. E14 stands for a 14 mm diameter thread. "E" stands for Edison thread. So you always have to put an E14 light bulb in a fixture with an E14 fitting. An E14 light bulb can come in many forms, the most well known being the candle-shaped bulb on chandeliers. The E14 bulb is the little sister of the E27 bulb.
Check out here the complete collection of E14
light bulbs by zangra.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.