Blown glass ceiling light for outdoor spaces | zangra

bathroom blown glass wall or ceiling light - Ø 36cm

light.o.124.w.001
€150.83
x
x
- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Circular lamp in blown glass

For indoor or outdoor use, as a wall or ceiling light, this elegant lamp with its velvety appearance will look great in any interior, classic or modern.
The glass shade is crafted by the glass blowers of a traditional European glass factory. The manufacturing process, which respects tradition, requires real expertise.
Once the glass has been blown into its final shape, by means of a blowpipe and iron moulds, it is placed into an annealing oven, controlling its cooling down to prevent any cracking.
The lamp has an IP44 rating, meaning it is protected against dust and water.
This lamp has two E27 sockets and must be fitted with two E27 bulbs.


What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.


What does IP44 mean?

IP44 means that this lamp is protected against:
4 : a solid object greater than 1mm.
4 : water splashes from all directions.
Indoor: rated for installation in bathroom zones 2 and 3.
Outdoor: suitable for outdoor use if correctly installed in zone 3 and 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.