Opal glass replacement lampshade for pendant light | zangra

opal glass replacement lampshade for pendant light

light.163.go.002
€73.97
x
x
- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Replacement lampshade for pendant lamp with glass shade.

Design your pendant light in just a few clicks!

Create a customized pendant light, adapted to your needs.

1. Choose a ceiling rose
2. Order a textile cable of the required length from the "single cables" or "twisted cables" sections. Cotton and jute cables are not compatible with this lampholder.
3. Select a socket or shade

You can assemble the components yourself or, if you are not handy, have our team do the assembly for you. In this case, please add our assembly product to your order. An assembly means a socket is connected to the cable. If you have several sockets to assemble, please choose the equivalent number of "assembly products".

Glass: a sustainable and recyclable material

At zangra, we believe that glass should be re-inserted into our daily lives to replace plastic. Glass plays an essential role in preserving our environment. Its responsible use and sustainable life cycle make it a valuable ally in the fight to protect the ecology. One of the most commendable features of glass is its ability to be recycled almost indefinitely. Unlike other materials that lose their properties during recycling, glass can be melted and remoulded several times without altering its quality. This reduces demand for natural resources, saves energy and minimises waste.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

At what height to hang a pendant lamp?

1. Above a dining table
Above a dining table, lower the pendant lamp so that it is up to 60 to 70 cm above the table. This means you won’t be blinded when you eat and won’t hit your head when you get up. The height indicated corresponds to the distance between the top of the table and the lowest part of the suspension light. The light should end up approximately at your eye level when you are standing, and you’ll see the underside of the light when you are sitting. You need to ensure that the light diffused by the pendant lamp illuminates the entire table.
2. Above a coffee table
A pendant lamp placed above a coffee table should be placed higher than those installed above a dining table so that you do not hit your head.
3. In the middle of a room
You should leave about 210 cm between the floor and the lowest part of the pendant lamp so that tall people do not hit their heads. If it is hung above a piece of furniture or in a corner, it can go down lower.
4. Above the kitchen worktop
Hand the light at least 180 cm from the floor or between 75 and 85 cm from your worktop or countertop. Don't hang your suspension too high, so you don't have to look at the light all the time, but it shouldn’t be too low either as it might not illuminate the whole worktop.
5. On each side of a mirror in the bathroom
If you want to hang two pendant lamps on each side of a mirror, they are best positioned according to the average eye height of your family members. It is also recommended that the two suspension lights are not more than 70 cm apart so that the face is sufficiently illuminated.

Are the screws included?
This lamp is fixed to the ceiling/wall with a metal bracket. The screws that serve to attach the bracket to the lamp are included. The screws used to attach the bracket to the ceiling/wall are not included because the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).

How should I install several pendant lights?
There are several ways to install pendant lamps. You can choose to install different kinds of lamps or several identical lamps. The fabric cables can be wired to a single electrical point or to several independent electrical points. If there is only one electrical point on the ceiling, but you still want to hang several pendant lamps, make sure you choose the right ceiling rose. For example, if you want to wire five lamps to one electrical point, choose a ceiling rose with at least five holes (see here), or a rose with a large opening that can accommodate several fabric cables.
You can find the complete collection of zangra ceiling roses here.
Wherever you want your pendant light to hang, you need to fix an insulator to the ceiling. An insulator is a kind of button with which you attach your cable to the ceiling. You can find several types of insulators on our page dedicated to Lighting Accessories.