Double surface-mounted white spotlight | zangra

double surface-mounted white spotlight Barbara

barbara.w
€99.59
x
x

barbara.w barbara.w double surface-mounted white spotlight Barbara €99.59
gu10.led.001 gu10.led.001 GU10 LED light bulb - dimmable €8.27
- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION

Surface-mounted spotlight Barbara
The Barbara double surface-mounted spotlights by zangra are both swiveling and tilting. Barbara is available in white or black.
This light fixture is made in Europe and complies with strict European regulations.
With its discreet design, this model is perfect for accent lighting.
This lamp is equipped with a GU10 socket and therefore requires a GU10 bulb.


Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What is a GU10 light bulb?

A GU10 light bulb is designed for GU10 or GZ10 fittings. These light bulbs are commonly used for spotlights. The GU10 light bulb employs a twist-and-lock system, called Bi-Pin, which consists of two prongs spaced 10 mm apart. U means "Universal". They operate at 230 volts without the need for a transformer or a driver. If your light bulb is dimmable, you will be able to adjust the brightness at all time. It’s designed to fit snugly into place with just a push and a clockwise twist.
Here you will find a GU10 light source, if you would like to buy one!

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.
 

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

Are the screws included?
This lamp is fixed to the ceiling/wall with a metal bracket. The screws that serve to attach the bracket to the lamp are included. The screws used to attach the bracket to the ceiling/wall are not included because the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).