outdoor black ceiling spotlight Ø 6 cm - IP43

light.o.110.b.001

PLN 684.04

	light.o.110.b.001		outdoor black ceiling spotlight - IP43	PLN 684.04
	gu10.led.001		GU10 LED light bulb - dimmable	PLN 44.61

- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION

Black brass spotlights for entrance porch

Let yourself be seduced by the sober, elegant design of this black brass spotlight.
It diffuses a bright, focused light that's ideal for soffit or porch lighting. It can be installed as a ceiling or wall light to suit your needs.
This lamp has a GU10 socket and must be fitted with a GU10 bulb.

What are the properties of brass?

Brass is an alloy consisting predominantly of zinc and copper. Brass is significantly more yellow than pure copper and bronze. It is a material that has always been appreciated for its resistance and its colour close to that of gold.
Brass resists moisture and does not rust, and is easy to maintain. Over time, the glossy surface will tend to oxidize naturally and become verdigris (greyish-green). This is a natural process of brass ageing and does not constitute grounds for complaint or is something covered by the warranty.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does IP43 mean?

IP43 means that this lamp is protected against:
4 : a solid object greater than 1mm.
3 : sprays of water up to 60° from the vertical.
Indoor: rated for installation in bathroom zone 3.
Outdoor: suitable for outdoor use if correctly installed in zone 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

What is a GU10 light bulb?

A GU10 light bulb is designed for GU10 or GZ10 fittings. These light bulbs are commonly used for spotlights. The GU10 light bulb employs a twist-and-lock system, called Bi-Pin, which consists of two prongs spaced 10 mm apart. U means "Universal". They operate at 230 volts without the need for a transformer or a driver. If your light bulb is dimmable, you will be able to adjust the brightness at all time. It’s designed to fit snugly into place with just a push and a clockwise twist.
Here you will find a GU10 light source, if you would like to buy one!

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

Are the screws included?

No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

SKU	light.o.110.b.001
EAN code	5415249049638
Material	Brass
Colour	Black
Height	10,5 cm
Diameter	Ø 6 cm
Origin	Europe
Marking	CE
Lamp holder type	GU10
Wattage	max 4 W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP43
Safety class	Class 1
Interaxial distance	4 cm
Fixation screws included	no
Connection	Backside
Installation instructions
Protection's indice