red porcelain lamp

This product is part of the Mondrian collection, a series of porcelain lighting fixtures available in six colours and designed to be freely combined. All models share the same finish and design language, allowing them to blend harmoniously into playful or graphic compositions. Mix colours, shapes and points of light to create an arrangement that fits perfectly into your interior. A collection inspired by colour, simplicity and the power of combinations.
Each colour is completely consistent throughout the collection. For example, if you choose yellow, every lamp in that colour features exactly the same shade of yellow.

The red colour brings warmth to your interior. Red symbolizes passion and strength! It is a colour that suits those who love adventure! Red will be an eye-catcher in an otherwise neutral interior. Did you know that warm colours, like red, are ideal for the kitchen? It seems that they increase the appetite!

When lighting up your interior, the use of colour is essential. Using colour in the home enhances its architecture and has a direct effect on emotions, behaviour and well-being.
zangra has selected a range of intense colours for you and wraps a variety of its iconic collection with a colourful coating.
Opt for a colourful touch in your interior by choosing a "feel good" colour from zangra's new colour palette. Bring on the colour!

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.
 

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration.

This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors.

A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws. 

This product can be installed with a flush-mounting box (diameter 70 mm x depth 60 mm), but it can also be perfectly installed without one. The flush-mounting box is not included with this product.