brass Art Deco lamp, Dores

Dores is a lighting fixture by zangra, available in three different models and a range of colours. Its versatile design allows it to blend effortlessly into a variety of interior styles.
Suitable for both wall and ceiling mounting, Dores is supplied with a flush-mounting box, though it can also be installed without one. Fitted with an E27 socket, it is compatible with all E27 light bulbs.

At zangra, we believe that glass should be re-inserted into our daily lives. Glass plays an essential role in preserving our environment. Its responsible use and sustainable life cycle make it a valuable ally in the fight to protect the ecology. One of the most commendable features of glass is its ability to be recycled almost indefinitely. Unlike other materials that lose their properties during recycling, glass can be melted and remolded several times without altering its quality. This reduces demand for natural resources, saves energy and minimizes waste.

The colour gold is a stylish colour that immediately gives your interior a feeling of richness. Gold, just like silver, basically works with any other colour. Combined with black, the room suddenly becomes very chic, while the combination of gold with white provides a more modern look. If you combine gold with pink, you get a Scandinavian atmosphere. Your imagination is the limit!

When lighting up your interior, the use of colour is essential. Using colour in the home enhances its architecture and has a direct effect on emotions, behaviour and well-being.
zangra has selected a range of intense colours for you and wraps a variety of its iconic collection with a colourful coating.
Opt for a colourful touch in your interior by choosing a "feel good" colour from zangra's new colour palette. Bring on the colour!

No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

This lamp comes with a Ø 7 cm x 6 cm flush-mount box. However, the installation of the lamp does not necessarily require the use of this flush-mount box.
If you choose not to use the flush-mount box, it is imperative that the diameter of the hole on the mounting surface be at least 2 cm to allow the fixation system (screws, nuts, and accessories) to be inserted.

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.
 

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration.

This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors.

A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.