Loading

white porcelain light

denis.w.030

shipped within 1-2 days

In stock

energy class

energy class: F
$91.10
Loading
Denis and Denise are two porcelain light fixtures with a simple, well-balanced shape, designed by zangra. Both measure 30 cm in length and are designed to accommodate an S14d tubular bulb, which harmonises perfectly with the porcelain.
Denise is supplied with a ribbed glass tubular bulb, giving the light a subtle texture.
Denis, on the other hand, is fitted with an opal glass tubular bulb for a softer and more even light diffusion.
Denis and Denise are delivered with their corresponding S14d tubular bulb. If you like to plan ahead, you can optionally add an extra S14d tubular bulb as a spare.
A sober design where light and material enhance each other!

Light fixtures with an S14d lamp holder are compatible with tubular bulbs that have an S14d socket located in the middle of the tube. You just need to gently push the bulb to click it into the socket.

Soon after being established in 2009, zangra started to successfully cooperate with different porcelain factories all over the world – a cooperation that continues to this day. In recent years, zangra has spent a lot of time in world’s most famous porcelain cities. From Limoges in France to Jingdezhen in China, zangra was able to work at legendary porcelain factories. So in cooperation with the staff zangra created new models and rediscovered old forgotten molds. A number of old molds were put back in production making new pieces. zangra’s porcelain is still produced by hand, piece by piece. This makes each piece unique. zangra's work proved successful with their products being sold all over the world.

Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws. 

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.
 

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration.

This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors.

A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

Material Porcelain, Glass
Colour White
Length 30 cm
Width 4,6 cm
Depth 6,1 cm
Weight 720 g
Made in PRC
Designed by zangra in 2025
Marking CE
Lamp holder type s14d
Lightbulb type LED
Wattage Denis 5 W LED / Denise 3,2 W LED
Maximum wattage max 12 W LED
Lumen Denis 450 lm / Denise 220 lm
Kelvin Denis 2700 K / Denise 2200 K
Voltage AC 230 V
Frequency ~ 50 Hz
Protection marking (IP) IP20
Safety class Class 2
Dimmable no
Colour temperature warm white light
Life span 20 000 h
Number of circuits 20 000 on/off
Energy label G / F
Interaxial distance 18 cm
Dimensions wall or ceiling rose 30 x 4,6 x 3,9 cm
Fixation screws included yes
Number of screws 4
Cable entry position Rear entry
Type of luminaire Ceiling light, Wall light
Lightbulb included Yes
Installation instructions
Technical drawings
Protection's indice

Cart

Your cart is empty.