White porcelain art deco lighting | zangra

white porcelain table or wall light Cedric

cedric.w.glass.L.001
€135.13
x
x

- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION

Porcelain Schoolhouse lamp with switch

This lamp, named Cedric, was designed by zangra.
The vintage design is inspired by traditional 1920s Schoolhouse lamps.
With their clean, utilitarian lines and practical light-diffusing shades, hard-working Schoolhouse lights were a popular choice wherever good task and ambient lighting was needed.
Today, Schoolhouse-style fixtures are still appreciated for their timeless good looks and are a sure way to add retro flair to kitchens, bathrooms, and other light-starved areas of the house.
This lamp features a 3-m long textile cable with a switch and plug and requires an E27 bulb.
You can easily mount this lamp on a wall or use it as a table lamp.
This model is available in black, white, pink and retro green. The porcelain base has a diameter of 14 cm and is compatible with different glass shades.
Discover the entire zangra collection of lamps with switches.

Why choose a wall lamp with a cord and a switch?

You simply need to attach this lamp to the wall and plug it in. A wall lamp with a switch is the ideal solution when there is no electrical connection and you cannot create one. If it isn’t possible to change the electrical wiring in your home, a lamp with a cable, a switch and a plug is ideal!

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.


What does IP21 mean?

IP21 means that this lamp is protected against:
2: the intrusion of solid particles with a dimension greater than 12.5 millimetres.
1: vertical falling drops of water.
Indoor: rated for installation in bathroom zone 3.
Outdoor: not suitable for use (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Do not use an electrical screwdriver
Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws.