porcelain plug-in pendant light - grey

alice.g.300

$46.29

alice.g.300	OPTION 1: 300 cm	$46.29
alice.g.350	OPTION 1: 350 cm	$46.29
alice.g.450	OPTION 3: 450 cm	$52.01

- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Alice lamp to hang on the wall
This lamp with a textile cable, a plug and a switch has been designed by the Belgian brand zangra and has been given the name Alice. Alice is available in several colours and you can choose between two different lengths of cable. Thanks to its plug, you can plug this lamp in anywhere there is a socket. Wall hooks are also available from zangra. See the complete collection of hooks here.

Why choose a wall lamp with a cord and a switch?

You simply need to attach this lamp to the wall and plug it in. A wall lamp with a switch is the ideal solution when there is no electrical connection and you cannot create one. If it isn’t possible to change the electrical wiring in your home, a lamp with a cable, a switch and a plug is ideal!

The story behind zangra's porcelain

Soon after being established in 2009, zangra started to successfully cooperate with different porcelain factories all over the world – a cooperation that continues to this day. In recent years, zangra has spent a lot of time in world’s most famous porcelain cities. From Limoges in France to Jingdezhen in China, zangra was able to work at legendary porcelain factories. So in cooperation with the staff zangra created new models and rediscovered old forgotten molds. A number of old molds were put back in production making new pieces. zangra’s porcelain is still produced by hand, piece by piece. This makes each piece unique. zangra's work proved successful with their products being sold all over the world.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

Material	Porcelain
Colour	Grey / Black / White
Total length	300 cm / 450 cm
Cable length	292 cm / 442 cm
Origin	Europe
Designed by zangra in	2022
Marking	CE
Lamp holder type	E27
Lightbulb type	LED E27
Wattage	max 6 W LED
Voltage	AC 230 V
Protection marking	IP20
Safety class	Class 2
Fixation screws included	no
Type of luminaire	Pendant lamp
Lightbulb included	No
Protection's indice