Combine white porcelain in brass potence lamp. perfect! | zangra

plug-in white porcelain potence light with swing arm

light.115.w.063
$178.54
x
x
- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Swing-arm wall lamp ideal for stylishly illuminating your bedroom
Discover our stunning white lacquered brass swing-arm lamp, featuring an elegant porcelain lamp holder and a swivelling arm that makes this lamp a flexible and refined lighting fixture.
It effortlessly fits into all the rooms of your home, whether it's in the living room, above the dining table, or at the head of the bed.
Crafted with care in a European workshop, this swing-arm lamp draws inspiration from a 1950s design, seamlessly blending refined industrial style with exceptional functionality.
This
potence wall light with switch comes with a 350 cm textile cable, a black plug and a black switch. The distance between the switch and the start of the lamp is 65 cm.
M
ounting screws are included.
This lamp requires an E27 bulb.
This model is also available in black or raw brass/porcelain.

Discover the entire zangra collection of lamps with switches.


Why choose a wall lamp with a cord and a switch?

You simply need to attach this lamp to the wall and plug it in. A wall lamp with a switch is the ideal solution when there is no electrical connection and you cannot create one. If it isn’t possible to change the electrical wiring in your home, a lamp with a cable, a switch and a plug is ideal!

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.
 

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.