green wall or ceiling light replacement base - Ø 8 cm

Name: green wall or ceiling light replacement base - Ø 8 cm green wall or ceiling light replacement base - Ø 8 cm
Availability: InStock

light.131.gr

$90.37

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Replacement base for green metal lamp with glass shade.

Green in your home?

Green is associated with nature, relaxation, tranquility and is a colour that is usually well appreciated in a household. It brings peace and harmony to a home. The green colour is seen as one of the most soothing you can bring into your home.

The effects of colours on our behaviour

When lighting up your interior, the use of colour is essential. Using colour in the home enhances its architecture and has a direct effect on emotions, behaviour and well-being.
zangra has selected a range of intense colours for you and wraps a variety of its iconic collection with a colourful coating.
Opt for a colourful touch in your interior by choosing a "feel good" colour from zangra's new colour palette. Bring on the colour!

Choose the glass globe that fits our lamps
Our glass globes and shades are the perfect match for zangra's porcelain, bakelite and brass lamp collections. The globes are fitted with a screw thread or a neck, ensuring a secure attachment to their base. They are available as spare parts, allowing you to extend the life of your lamp if a globe needs replacement.
Due to the manufacturing process, glass globes may exhibit parting lines.

Browse our extensive collection here:
* globes/shades size S: Ø74.5mm screw thread
* globes/shades size M: Ø84.5mm screw thread
* globes/shades size L: Ø100mm neck
* globes/shades size XL: Ø120mm neck

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

How to install this flush mount model?

This lamp is supplied with a Ø 7 cm x 6 cm flush-mount wall box. However, the installation of the lamp does not necessarily require the use of this flush-mount wall box.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Code	light.131.gr
EAN code	5415249057572
Material	Metal / Brass
Colour	Green
Height	5 cm
Diameter	Ø 8 cm
Origin	Europe
Designed by zangra in	2020
Marking	CE
Lamp holder type	E27
Wattage	max 6 W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP20
Safety class	Class 1
Interaxial distance	6 cm
Fixation screws included	no
Size	screw: Ø 74,5 mm
Lightbulb included	No
Assembly instructions