brass wall or ceiling light replacement base - Ø 8 cm

Name: brass wall or ceiling light replacement base - Ø 8 cm brass wall or ceiling light replacement base - Ø 8 cm
Availability: InStock

light.131.go

$105.53

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Replacement base for brass lamp with glass shade.

Gold in your home?

The colour gold is a stylish colour that immediately gives your interior a feeling of richness. Gold, just like silver, basically works with any other colour. Combined with black, the room suddenly becomes very chic, while the combination of gold with white provides a more modern look. If you combine gold with pink, you get a Scandinavian atmosphere. Your imagination is the limit!

What are the properties of brass?

Brass is an alloy consisting predominantly of zinc and copper. Brass is significantly more yellow than pure copper and bronze. It is a material that has always been appreciated for its resistance and its colour close to that of gold.
Brass resists moisture and does not rust, and is easy to maintain. Over time, the glossy surface will tend to oxidize naturally and become verdigris (greyish-green). This is a natural process of brass ageing and does not constitute grounds for complaint or is something covered by the warranty.

Choose the glass shade that fits our lamps
Our glass globes and shades are the perfect match for zangra's porcelain, bakelite and brass lamp collections. The shades are available as spare parts, allowing you to extend the life of your lamp if a globe needs replacement.
Any bubbles or parting lines on our products are proof of the real craftsmanship that goes into the manufacturing process.

Browse our extensive collection here:
* globes/shades size S: Ø73mm screw thread
* globes/shades size M: Ø84.5mm screw thread
* globes/shades size L: Ø100mm neck
* globes/shades size XL: Ø120mm neck

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

How to install this flush mount model?

This lamp is supplied with a Ø 7 cm x 6 cm flush-mount wall box. However, the installation of the lamp does not necessarily require the use of this flush-mount wall box.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Code	light.131.go
Material	Brass
Height	5 cm
Diameter	Ø 8 cm
Origin	Europe
Designed by zangra in	2020
Marking	CE
Lamp holder type	E27
Wattage	max 6 W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP20
Safety class	Class 1
Interaxial distance	6 cm
Fixation screws included	no
Size	screw: Ø 74,5 mm
Lightbulb included	No
Assembly instructions