black lamp holder for pendant light - Ø 8.5cm
ceilinglamp.131.002.b
$88.09
x
x
Minimalist black lamp holder for pendant lamp
This designer black metal lamp holder accommodates both an E27 bulb and a glass shade. It is specially designed to be connected to a textile cable to make a pendant lamp.See our complete lamp designed with this socket.
Design your pendant light in just a few clicks!
Create a customized pendant light, adapted to your needs.1. Choose a ceiling rose
2. Order a textile cable of the required length from the "single cables" or "twisted cables" sections. Cotton and jute cables are not compatible with this lampholder.
3. Select a socket or shade
You can assemble the components yourself or, if you are not handy, have our team do the assembly for you. In this case, please add our assembly product to your order. An assembly means a socket is connected to the cable. If you have several sockets to assemble, please choose the equivalent number of "assembly products".
Choose the glass shade that fits our lamps
Our glass globes and shades are the perfect match for zangra's porcelain, bakelite and brass lamp collections. The shades are available as spare parts, allowing you to extend the life of your lamp if a globe needs replacement.
Any bubbles or parting lines on our products are proof of the real craftsmanship that goes into the manufacturing process.
Browse our extensive collection here:
* globes/shades size S: Ø73mm screw thread
* globes/shades size M: Ø84.5mm screw thread
* globes/shades size L: Ø100mm neck
* globes/shades size XL: Ø120mm neck
Is the light bulb included?
The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.What does E27 mean?
E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.
What does the IP value mean on a light fitting?
All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.What does the IP20 value mean on this light fitting?
IP20 means that the light fitting:2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.
How should I install several pendant lights?
There are several ways to install pendant lamps. You can choose to install different kinds of lamps or several identical lamps. The fabric cables can be wired to a single electrical point or to several independent electrical points. If there is only one electrical point on the ceiling, but you still want to hang several pendant lamps, make sure you choose the right ceiling rose. For example, if you want to wire five lamps to one electrical point, choose a ceiling rose with at least five holes (see here), or a rose with a large opening that can accommodate several fabric cables.
You can find the complete collection of zangra ceiling roses here.
Wherever you want your pendant light to hang, you need to fix an insulator to the ceiling. An insulator is a kind of button with which you attach your cable to the ceiling. You can find several types of insulators on our page dedicated to Lighting Accessories.
| SKU | ceilinglamp.131.002.b |
| EAN code | 5415249057800 |
| Material | Metal |
| Colour | Black |
| Height | 5 cm |
| Diameter | Ø 8,5 cm |
| Origin | Europe |
| Designed by zangra in | 2021 |
| Marking | CE |
| Lamp holder type | E27 |
| Lightbulb type | max Ø 5,5 cm |
| Wattage | max 6 W LED |
| Voltage | AC 230 V |
| Frequency | ~ 50 Hz |
| Protection marking | IP20 |
| Safety class | Class 1 |
| Fixation screws included | no |
| Size | screw: Ø 74,5 mm |
SUBSCRIBE TO THE NEWSLETTER
Thank you for subscribing! 
VILLA HASTIÈRE
Rent zangra’s holiday home!
ZANGRA SHOP
discover zangra in Brussels
