Wall shelf with integrated lighting | zangra

white ceramic wall shelf with black light

light.140.b.062
$96.03
x
x

light.140.b.062 light.140.b.062 white ceramic wall shelf with black light $96.03
lightbulb.lf.004.01.095 lightbulb.lf.004.01.095 E27 dimmable filament LED light bulb - concave - 2700K - 4W $25.33
- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION

Are you looking for a minimalist and original wall light?
With its elegant design, its clean lines and its ease of use, this luminaire will fit perfectly above your bedside table or in your living room. Functional and practical, you can also drop your little treasures.
For installation, nothing easier! Simply secure it with the two screws and plugs provided and plug in to illuminate your interior.

If you want to add an extra touch of originality, don't hesitate to combine the lamp with one of our decorative bulbs!

This wall lamp consists of a ceramic wall shelf, a porcelain socket and a textile cable with plug and switch.

How to open and unlock a bulb holder?

Our lamp holders have a safety feature, which means that once put together, they cannot be unscrewed any more. This is to ensure you don’t undo the lamp holder when changing the bulb and give yourself a nasty electric shock! To attach a power cord to the lamp holder, you need to unscrew the base first. To do this, you have to push down the retention pin inside the lamp holder (e.g. with a screwdriver) and unscrew the upper ring.

Why choose a wall lamp with a cord and a switch?

You simply need to attach this lamp to the wall and plug it in. A wall lamp with a switch is the ideal solution when there is no electrical connection and you cannot create one. If it isn’t possible to change the electrical wiring in your home, a lamp with a cable, a switch and a plug is ideal!

Do not use an electrical screwdriver
Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws. 

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.
 

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.