Porthole wall light in brass, marine style | zangra

nickel-plated brass bulkhead light for outdoor use

light.o.020.005
$118.94
x
x

light.o.020.005 light.o.020.005 OPTION 1 $118.94
light.o.020.001 light.o.020.001 OPTION 2 $146.02
Out of stock
- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION

Choose a marine-inspired outdoor lamp
zangra presents this traditional brass nautical-style lamp. This light fitting can be used as a wall lamp, ceiling lamp or exterior lamp.
Whatever the style of your home, this timeless model is a classic and will adapt to any interior.
These nostalgic lamps are made in Europe in a traditional workshop that has specialized in the manufacture of navy lamps for more than half a century.
These marine lamps are extremely durable and have a protection rating of 64, which means that they are protected against splashes of water.
 

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.
 

What does IP64 mean?

IP64 means that this lamp is protected against:
6 : dust (dust tight).
4 : water splashes from all directions.
Indoor: rated for installation in bathroom zones 2 and 3.
Outdoor: suitable for outdoor use if correctly installed in zones 3 and 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

This light fixture is equipped with an E27 socket.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

Technical information
The connection is made on the side of the fixture.