Wall light in black porcelain and opal glass | zangra

wall light Arya

arya.b.go
€109.06
x
x
- +

ZANGRA SAYS TECHNICAL DESCRIPTION

Retro wall light Arya
This wall lamp by zangra has been given the name Arya.
The 25-cm diameter opal glass shade is topped with a brass ring. The wall plate and the socket are in porcelain, while the arm is made of brass. Thanks to two screws, you can easily fix this light fitting to a wall.
This wall lamp has an E14 socket, into which an E14 light bulb fits.


What are the properties of brass?

This product is made of brass, or yellow copper, given its colour. Brass is significantly more yellow than pure copper and bronze. It is a material that has always been appreciated for its resistance and its colour close to that of gold.
Brass resists moisture and does not rust, and is easy to maintain. Over time, the glossy surface will tend to oxidize naturally and become matt.

What does E14 mean?

E14 stands for the type of the fitting of a lamp. E14 stands for a 14 mm diameter thread. "E" stands for Edison thread. So you always have to put an E14 light bulb in a fixture with an E14 fitting. An E14 light bulb can come in many forms, the most well known being the candle-shaped bulb on chandeliers. The E14 bulb is the little sister of the E27 bulb.
Check out here the complete collection of E14
light bulbs by zangra.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Do not use an electrical screwdriver
Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws.