outdoor raw brass swan neck wall light - IP53

Name: outdoor raw brass swan neck wall light - IP53 outdoor raw brass swan neck wall light - IP53
Availability: InStock

light.o.088.go.001

$305.79

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Brass wall light with raw style

This European-made brass gooseneck wall light with its raw, industrial design can be installed indoors or outdoors and is ideal for bathrooms.
It is topped by a glass shade that gives it an elegant appearance.
This lamp has an E27 socket and must be fitted with an E27 bulb.

What are the properties of brass?

Brass is an alloy consisting predominantly of zinc and copper. Brass is significantly more yellow than pure copper and bronze. It is a material that has always been appreciated for its resistance and its colour close to that of gold.
Brass resists moisture and does not rust, and is easy to maintain. Over time, the glossy surface will tend to oxidize naturally and become verdigris (greyish-green). This is a natural process of brass ageing and does not constitute grounds for complaint or is something covered by the warranty.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does IP53 mean?

IP53 means that this lamp is protected against:
5 : dust.
3 : sprays of water up to 60° from the vertical.
Indoor: rated for installation in bathroom zones 2 and 3.
Outdoor: suitable for outdoor use if correctly installed in zone 3 and 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

Technical information
Dowels and fixing screws are provided.

Code	light.o.088.go.001
EAN code	5415249048761
Height	18 cm
Width	29 cm
Depth	44 cm
Origin	Europe
Marking	CE
Lamp holder type	E27
Lightbulb type	max Ø 6cm
Wattage	Max 6 W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP53
Safety class	Class 1
Interaxial distance	8 cm
Fixation screws included	yes
Connection	Backside
Assembly instructions
Protection's indice