outdoor or bathroom blown glass wall or ceiling light - 24cm - IP43

Name: outdoor or bathroom blown glass wall or ceiling light - 24cm - IP43 outdoor or bathroom blown glass wall or ceiling light - 24cm - IP43
Availability: InStock

light.o.107.w.001

$157.49

ZANGRA SAYS TECHNICAL DESCRIPTION

Blown glass mirror lamp

This blown glass lamp diffuses a soft light with its velvety shade and is ideal for lighting bathroom mirrors.
The glass shades are crafted by the glass blowers in a traditional European glass factory.
Once the glass has been blown into its final shape, by means of a blowpipe and iron moulds, it is placed into an annealing oven, controlling its cooling down to prevent any cracking.
The lamp is made of Triplex blown glass with a matte finish.
It has an E27 socket and must be fitted with an E27 bulb.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does IP43 mean?

IP43 means that this lamp is protected against:
4 : a solid object greater than 1mm.
3 : sprays of water up to 60° from the vertical.
Indoor: rated for installation in bathroom zone 3.
Outdoor: suitable for outdoor use if correctly installed in zone 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Code	light.o.107.w.001
EAN code	5415249048457
Height	12 cm
Width	24 cm
Depth	9,5 cm
Origin	Europe
Marking	CE
Lamp holder type	E27
Wattage	Max 6 W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP43
Safety class	Class 1
Interaxial distance	6,5 cm
Connection	Backside
Assembly instructions
Protection's indice