Home Lighting Sanitaryware Light switches & sockets Handles and knobs Sofas Bathroom By product By room By collection By style By colour New

outdoor or bathroom wall or ceiling light - glass globe - Ø 20cm - IP65

light.o.090.b

shipped within 1-2 days

In stock

$172.40

light.o.090.b

black

$172.40

light.o.090.go

gold-coloured

$190.27

light.o.090.w

white

$172.40

lightbulb.lf.001.05.060-2700k

dimmable LED 6.5W

$17.30

Blown glass lamp

This blown glass lamp is crafted by skilled glassmakers in a traditional workshop in Europe.
It can be used indoors or outdoors, as a wall or ceiling light.
The lamp has an IP65 rating, meaning it is fully protected against dust and water.
The lamp has a porcelain socket, a polycarbonate base and Triplex blown glass with a matte finish.
It has an E27 socket and must be fitted with an E27 bulb.

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does IP65 mean?

IP65 means that this lamp is protected against:
6 : dust (dust tight).
5 : jets of water from all directions.
Indoor: rated for installation in bathroom zones 1, 2 and 3.
Outdoor: suitable for outdoor use if correctly installed in zone 2,3 and 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Material	Glass, Plastic
Colour	White
Depth	18,5 cm
Diameter	Ø 19,5 cm
Made in	Europe
Marking	CE
Lamp holder type	E27
Lightbulb type	max Ø 9 cm
Maximum wattage	max 6 W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking (IP)	IP65
Safety class	Class 2
Cable entry position	Rear entry
Type of luminaire	Ceiling light, Wall light
Lightbulb included	No
Installation instructions
Technical drawings
Protection's indice