bathroom blown glass wall or ceiling light - Ø 14cm - IP44
light.o.121.b.001
$161.99
x
x
Lamp in blown glass for the bathroom
This elegant lamp, with its velvety appearance and minimalist lines, suit both modern and classic interiors and can be placed indoors or outdoors and be used as a ceiling or wall light.
The glass shades are crafted by the glass blowers of a traditional European glass factory.
Once the glass has been blown into its final shape, by means of a blowpipe and iron moulds, it is placed into an annealing oven, controlling its cooling down to prevent any cracking.
This lamp is made from Triplex blown glass (matt finish).
This lamp has an E27 socket and must be fitted with an E27 bulb.
What does the IP value mean on a light fitting?
All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.
What does IP44 mean?
IP44 means that this lamp is protected against:4 : a solid object greater than 1mm.
4 : water splashes from all directions.
Indoor: rated for installation in bathroom zones 2 and 3.
Outdoor: suitable for outdoor use if correctly installed in zone 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.
Is the light bulb included?
The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).You need a different type of screws depending on each material.
What does E27 mean?
E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.
| Material | Metal / Glass |
| Colour | White / Black |
| Total height | 15,6 cm |
| Diameter | Ø 14 cm |
| Made in | Europe |
| Marking | CE |
| Lamp holder type | E27 |
| Maximum wattage | Max 60 W |
| Voltage | AC 230 V |
| Frequency | ~ 50 Hz |
| Protection marking (IP) | IP44 |
| Safety class | Class 1 |
| Interaxial distance | 7,6 cm |
| Fixation screws included | no |
| Cable entry position | Rear entry |
| Type of luminaire | Wall or ceiling light |
| Lightbulb included | No |
| Protection's indice | |
SUBSCRIBE TO THE NEWSLETTER
Thank you for subscribing! 
ZANGRA HOLIDAY
rent zangra’s holiday homes
ZANGRA GALAXY
discover the world of zangra
