black LED spotlight - Ø 9cm

light.162.b

$51.71

	light.162.b		black LED spotlight - Ø 9cm	$51.71
	gu10.led.001		GU10 LED light bulb - dimmable	$10.55

- +

shipped within 1-2 days

ZANGRA SAYS TECHNICAL DESCRIPTION

Contemporary metal spotlight

This black metal surface-mounted spotlight, with its resolutely modern style, diffuses bright, targeted light, making it ideal for illuminating a kitchen or hallway. Understated, discreet and effective.
This lamp must be fitted with a GU10 bulb.
Also available in white or black/gold.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What is a GU10 light bulb?

A GU10 light bulb is designed for GU10 or GZ10 fittings. These light bulbs are commonly used for spotlights. The GU10 light bulb employs a twist-and-lock system, called Bi-Pin, which consists of two prongs spaced 10 mm apart. U means "Universal". They operate at 230 volts without the need for a transformer or a driver. If your light bulb is dimmable, you will be able to adjust the brightness at all time. It’s designed to fit snugly into place with just a push and a clockwise twist.
Here you will find a GU10 light source, if you would like to buy one!

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

EAN code	5415249066185
Material	Metal
Height	11 cm
Diameter	Ø 9 cm
Origin	Europe
Marking	CE
Lamp holder type	GU10
Wattage	max 10 W LED
Voltage	AC 230 V
Frequency	~ 50/60 Hz
Protection marking	IP20
Safety class	Class 1
Interaxial distance	6,5 cm
Fixation screws included	no
Type of luminaire	Wall or ceiling light
Lightbulb included	No
Assembly instructions
Protection's indice