black pendant lamp, Adeline

adeline.b.001

SEK 1,560

	adeline.b.001		pendant lamp - black	SEK 1,560	0
	lightbulb.lf.001.05.060-2700k		dimmable LED 6.5W	SEK 161	1

- +

shipped within 1-2 days

NOT AVAILABLE IN STORE

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Pendant light Adeline

The Adeline pendant light is designed by zangra.
It comes with 3 m of textile cable, making it ideal for high ceilings. You can easily shorten the cable yourself for rooms with lower ceilings.
This pendant light is of Belgian design and is entirely manufactured in Europe.
It features an E27 fitting and is compatible with E27 light bulbs.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

At what height to hang a pendant lamp?

1. Above a dining table
Above a dining table, lower the pendant lamp so that it is up to 60 to 70 cm above the table. This means you won’t be blinded when you eat and won’t hit your head when you get up. The height indicated corresponds to the distance between the top of the table and the lowest part of the suspension light. The light should end up approximately at your eye level when you are standing, and you’ll see the underside of the light when you are sitting. You need to ensure that the light diffused by the pendant lamp illuminates the entire table.
2. Above a coffee table
A pendant lamp placed above a coffee table should be placed higher than those installed above a dining table so that you do not hit your head.
3. In the middle of a room
You should leave about 210 cm between the floor and the lowest part of the pendant lamp so that tall people do not hit their heads. If it is hung above a piece of furniture or in a corner, it can go down lower.
4. Above the kitchen worktop
Hand the light at least 180 cm from the floor or between 75 and 85 cm from your worktop or countertop. Don't hang your suspension too high, so you don't have to look at the light all the time, but it shouldn’t be too low either as it might not illuminate the whole worktop.
5. On each side of a mirror in the bathroom
If you want to hang two pendant lamps on each side of a mirror, they are best positioned according to the average eye height of your family members. It is also recommended that the two suspension lights are not more than 70 cm apart so that the face is sufficiently illuminated.

How do you cut a textile cable?

Always wrap a piece of tape around the cable where you are going to cut it. That way, the fabric will not unravel.

Do not use an electrical screwdriver

Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does the IP20 value mean on this light fitting?

IP20 means that the light fitting:
2: is protected against the intrusion of solid particles with a dimension greater than 12.5 millimetres.
0: has no protection against water penetration. This light fitting can be installed indoors, but not in wet areas.
It is not recommended to install this light fitting outdoors. A device with an IP20 value is not protected against dust or moisture. A light fitting marked IP20 may have holes to prevent overheating. However, the lamp is protected against contact with objects larger than 12.5 mm, such as a hand or finger.
This model is suitable for indoor use, but not outdoors.

Material	Metal / Fabric / Porcelain
Colour	Black
Cable length	300 cm
Height	15 cm
Diameter	Ø 12 cm
Weight	800 g
Origin	Europe
Marking	CE
Lamp holder type	E27
Wattage	max 6W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP20
Safety class	Class 1
Interaxial distance	7.4 cm
Dimensions wall or ceiling rose	Ø 10 cm x 3 cm
Fixation screws included	yes
Number of screws	2
Type of luminaire	Pendant lamp
Lightbulb included	No
Protection's indice
Installation instructions