outdoor or bathroom porcelain light replacement base - Ø 10cm

Name: outdoor or bathroom porcelain light replacement base - Ø 10cm outdoor or bathroom porcelain light replacement base - Ø 10cm
Availability: InStock

light.o.016.c.w

$79.15

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Replacement base for porcelain lamp with glass shade.

This design is waterproof and therefore suitable for both outdoor and bathroom use. That is why the back of the lamp is completely closed. It means that there is little space left for the electrical wiring, since the connection must be made through a small rubber piece with a diameter of 2 cm. It is therefore advisable to work with a (standard) flush-mount junction box, as you can see here. Keep in mind that concrete or brick walls do not always allow installing flush-mounted junction boxes.

Works well with junction box (Ø 70mm, depth: 60mm)

The story behind zangra's porcelain

Soon after being established in 2009, zangra started to successfully cooperate with different porcelain factories all over the world – a cooperation that continues to this day. In recent years, zangra has spent a lot of time in world’s most famous porcelain cities. From Limoges in France to Jingdezhen in China, zangra was able to work at legendary porcelain factories. So in cooperation with the staff zangra created new models and rediscovered old forgotten molds. A number of old molds were put back in production making new pieces. zangra’s porcelain is still produced by hand, piece by piece. This makes each piece unique. zangra's work proved successful with their products being sold all over the world.

Choose the glass shade that fits our lamps
Our glass globes and shades are the perfect match for zangra's porcelain, bakelite and brass lamp collections. The shades are available as spare parts, allowing you to extend the life of your lamp if a globe needs replacement.
Any bubbles or parting lines on our products are proof of the real craftsmanship that goes into the manufacturing process.

Browse our extensive collection here:
* globes/shades size S: Ø73mm screw thread
* globes/shades size M: Ø84.5mm screw thread
* globes/shades size L: Ø100mm neck
* globes/shades size XL: Ø120mm neck

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does IP54 mean?

IP54 means that this lamp is protected against:
5 : dust.
4 : water splashes from all directions.
Indoor: rated for installation in bathroom zones 2 and 3.
Outdoor: suitable for outdoor use if correctly installed in zone 3 and 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Do not use an electrical screwdriver
Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws.

SKU	light.o.016.c.w
EAN code	5415249001049
Material	Porcelain
Height	5 cm
Diameter	Ø 10 cm
Marking	CE
Lamp holder type	E27
Lightbulb type	max Ø 6 cm
Wattage	max 6 W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP54
Safety class	Class 2
Interaxial distance	6 cm
Fixation screws included	no
Size	screw: Ø 84,5 mm
Assembly instructions