water-resistant brass wall light replacement base

Name: water-resistant brass wall light replacement base water-resistant brass wall light replacement base
Availability: InStock

light.o.101.go

€118.50

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Replacement base for brass wall lamp with glass shade.

This design is water-resistant and therefore suitable for both outdoor and bathroom use.

What are the properties of brass?

Brass is an alloy consisting predominantly of zinc and copper. Brass is significantly more yellow than pure copper and bronze. It is a material that has always been appreciated for its resistance and its colour close to that of gold.
Brass resists moisture and does not rust, and is easy to maintain. Over time, the glossy surface will tend to oxidize naturally and become verdigris (greyish-green). This is a natural process of brass ageing and does not constitute grounds for complaint or is something covered by the warranty.

Choose the glass shade that fits our lamps
Our glass globes and shades are the perfect match for zangra's porcelain, bakelite and brass lamp collections. The shades are available as spare parts, allowing you to extend the life of your lamp if a globe needs replacement.
Any bubbles or parting lines on our products are proof of the real craftsmanship that goes into the manufacturing process.

Browse our extensive collection here:
* globes/shades size S: Ø73mm screw thread
* globes/shades size M: Ø84.5mm screw thread
* globes/shades size L: Ø100mm neck
* globes/shades size XL: Ø120mm neck

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does IP43 mean?

IP43 means that this lamp is protected against:
4 : a solid object greater than 1mm.
3 : sprays of water up to 60° from the vertical.
Indoor: rated for installation in bathroom zone 3.
Outdoor: suitable for outdoor use if correctly installed in zone 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Are the screws included?
This lamp is fixed to the ceiling/wall with a metal bracket. The screws that serve to attach the bracket to the lamp are included. The screws used to attach the bracket to the ceiling/wall are not included because the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).

SKU	light.o.101.go
EAN code	5415249048983
Colour	Brass
Height	16,5 cm
Width	10 cm
Depth	27,5 cm
Origin	Europe
Designed by zangra in	2019
Marking	CE
Lightbulb type	max Ø 6 cm
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP43
Safety class	Class 1
Dimensions wall or ceiling rose	Ø 10 cm x 2,5 cm
Fixation screws included	no
Size	screw: Ø 84,5 mm
Assembly instructions