water-resistant black wall or ceiling light

Name: water-resistant black wall or ceiling light water-resistant black wall or ceiling light
Availability: InStock

light.o.119.b

$41.70

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

Minimalist lamp for the bathroom

This lamp with its clean, sober lines is made up of a base to be completed with the glass shade of your choice.
The lamp is powered by the side entrances, which can be used to connect several of these lamps together.
The lamp has an IP54 rating, so it's protected against dust and water and can be installed outdoors or in a bathroom.
This lamp has an E27 socket and must be fitted with an E27 bulb.
See the complete lamp here.

Choose the glass shade that fits our lamps
Our glass globes and shades are the perfect match for zangra's porcelain, bakelite and brass lamp collections. The shades are available as spare parts, allowing you to extend the life of your lamp if a globe needs replacement.
Any bubbles or parting lines on our products are proof of the real craftsmanship that goes into the manufacturing process.

Browse our extensive collection here:
* globes/shades size S: Ø73mm screw thread
* globes/shades size M: Ø84.5mm screw thread
* globes/shades size L: Ø100mm neck
* globes/shades size XL: Ø120mm neck

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does IP54 mean?

IP54 means that this lamp is protected against:
5 : dust.
4 : water splashes from all directions.
Indoor: rated for installation in bathroom zones 2 and 3.
Outdoor: suitable for outdoor use if correctly installed in zone 3 and 4 (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Do not use an electrical screwdriver
Do not use electrical screwdrivers when installing bakelite items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws.

SKU	light.o.119.b
EAN code	8714919004500
Material	Plastic
Height	9 cm
Width	15 cm
Diameter	Ø 9 cm
Origin	Europe
Designed by zangra in	2014
Marking	CE
Lamp holder type	E27
Lightbulb type	max Ø 6 cm
Wattage	max 6W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking	IP54
Safety class	Class 2
Interaxial distance	9,8 cm
Fixation screws included	no
Size	screw: Ø 84,5 mm