black porcelain wall light - glass shade - Ø 10 cm

david.wa.b.glass004

$100.86

- +

shipped within 1-2 days

NOT AVAILABLE IN STORE

ZANGRA SAYS TECHNICAL DESCRIPTION ASSOCIATED PRODUCTS

The story behind zangra's porcelain

Soon after being established in 2009, zangra started to successfully cooperate with different porcelain factories all over the world – a cooperation that continues to this day. In recent years, zangra has spent a lot of time in world’s most famous porcelain cities. From Limoges in France to Jingdezhen in China, zangra was able to work at legendary porcelain factories. So in cooperation with the staff zangra created new models and rediscovered old forgotten molds. A number of old molds were put back in production making new pieces. zangra’s porcelain is still produced by hand, piece by piece. This makes each piece unique. zangra's work proved successful with their products being sold all over the world.

Choose the glass shade that fits our lamps

Our glass globes and shades are the perfect match for zangra's porcelain, bakelite and brass lamp collections. The shades are available as spare parts, allowing you to extend the life of your lamp if a globe needs replacement.
Any bubbles or parting lines on our products are proof of the real craftsmanship that goes into the manufacturing process.

Browse our extensive collection here:
* globes/shades size S: Ø74.5mm screw thread
* globes/shades size M: Ø84.5mm screw thread
* globes/shades size L: Ø100mm neck
* globes/shades size XL: Ø120mm neck

Glass: a sustainable and recyclable material

At zangra, we believe that glass should be re-inserted into our daily lives. Glass plays an essential role in preserving our environment. Its responsible use and sustainable life cycle make it a valuable ally in the fight to protect the ecology. One of the most commendable features of glass is its ability to be recycled almost indefinitely. Unlike other materials that lose their properties during recycling, glass can be melted and remolded several times without altering its quality. This reduces demand for natural resources, saves energy and minimizes waste.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

What does E27 mean?

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does IP21 mean?

IP21 means that this lamp is protected against:
2: the intrusion of solid particles with a dimension greater than 12.5 millimetres.
1: vertical falling drops of water.
Indoor: rated for installation in bathroom zone 3.
Outdoor: not suitable for use (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Do not use an electrical screwdriver

Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws.

Flush-mounting box

Can be installed with flush-mounting box (Ø70mm x 60mm). Not included.

Material	Glass / Porcelain
Colour	Black
Diameter	Ø 10 cm
Made in	PRC
Designed by zangra in	2025
Marking	CE
Lamp holder type	E27
Maximum wattage	Max 10 W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking (IP)	IP21
Safety class	Class 2
Interaxial distance	6 cm
Fixation screws included	yes
Number of screws	2
Cable entry position	Rear entry
Type of luminaire	Wall light
Lightbulb included	No
Lightbulb size	max Ø 6,5 cm
Lampshade category	M
Glass screw size	Ø 84.5 mm - glass M
Flush-mounting box included	No