Replacement base for porcelain lamp with glass shade.
This design is waterproof and therefore suitable for both outdoor and bathroom use. That is why the back of the lamp is completely closed. It means that there is little space left for the electrical wiring, since the connection must be made through a small rubber piece with a diameter of 2 cm. It is therefore advisable to work with a (standard) flush-mount junction box, as you can see here. Keep in mind that concrete or brick walls do not always allow installing flush-mounted junction boxes. You may then opt for the non-waterproof version (IP20) of this lamp, with open back side and therefore more space for the wiring. Click here to see this non-waterproof fixture.
Bulb not included.
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws.
Works well with junction box (Ø 70mm, depth: 60mm)
|Diameter||Ø 8,5 cm|
|Designed by zangra in||2014|
|Lamp holder type||E27|
|Light bulb type||max Ø 5,5 cm|
|Wattage||max 6 W LED|
|Voltage||AC 230 V|
|Frequency||~ 50 Hz|
|Safety class||Class 2|
|Interaxial distance||6 cm|
|Fixation screws included||no|
|Size||screw: Ø 74,5 mm|