choose shipping location in order to see the correct pricing.
Your language and currency are based on your country, but you can change them at any time.
shipped within 1-2 days
In stock
Coby is a porcelain light with a textile cord. You can choose from more than thirty glass shades: round or elongated, in clear, opal, frosted or smoked glass.
The textile cord is 3 metres long and can easily be shortened if necessary. Coby features an E27 socket compatible with an E27 light bulb.
The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.
Our glass globes and shades are the perfect match for zangra's porcelain, bakelite and brass lamp collections. The shades are available as spare parts, allowing you to extend the life of your lamp if a globe needs replacement. Any bubbles or parting lines on our products are proof of the real craftsmanship that goes into the manufacturing process. Browse our extensive collection here: * globes/shades size S: Ø74.5mm screw thread * globes/shades size M: Ø84.5mm screw thread * globes/shades size L: Ø100mm neck * globes/shades size XL: Ø120mm neck
At zangra, we believe that glass should be re-inserted into our daily lives. Glass plays an essential role in preserving our environment. Its responsible use and sustainable life cycle make it a valuable ally in the fight to protect the ecology. One of the most commendable features of glass is its ability to be recycled almost indefinitely. Unlike other materials that lose their properties during recycling, glass can be melted and remolded several times without altering its quality. This reduces demand for natural resources, saves energy and minimizes waste.
E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries. The early light bulbs (remember them?) had a similar screw thread. Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States). If you would like to know which standard applies in your country, check out this page. Check out here the complete collection of E27 light bulbs by zangra.
1. Above a dining table Above a dining table, lower the pendant lamp so that it is up to 60 to 70 cm above the table. This means you won’t be blinded when you eat and won’t hit your head when you get up. The height indicated corresponds to the distance between the top of the table and the lowest part of the suspension light. The light should end up approximately at your eye level when you are standing, and you’ll see the underside of the light when you are sitting. You need to ensure that the light diffused by the pendant lamp illuminates the entire table. 2. Above a coffee table A pendant lamp placed above a coffee table should be placed higher than those installed above a dining table so that you do not hit your head. 3. In the middle of a room You should leave about 210 cm between the floor and the lowest part of the pendant lamp so that tall people do not hit their heads. If it is hung above a piece of furniture or in a corner, it can go down lower. 4. Above the kitchen worktop Hand the light at least 180 cm from the floor or between 75 and 85 cm from your worktop or countertop. Don't hang your suspension too high, so you don't have to look at the light all the time, but it shouldn’t be too low either as it might not illuminate the whole worktop. 5. On each side of a mirror in the bathroom If you want to hang two pendant lamps on each side of a mirror, they are best positioned according to the average eye height of your family members. It is also recommended that the two suspension lights are not more than 70 cm apart so that the face is sufficiently illuminated.
