// Banner We are open

zangra says

This collection of surface-mounted sockets and switches is a reproduction of historical models that have been brought up to current safety standards.
The 2.5 mm thick bakelite monoblock case guarantees you a superior quality product. Indeed, bakelite is a solid, lightweight, highly heat-resistant and electrically non-conductive material.
Please note that during assembly, the wiring and fixing from the inside is done directly on your wall. When mounting on a flammable support, be sure to close the back of the bakelite block with a "mounting plate" sold separately. It must then be drilled at the points indicated by the cutting line.

When assembling bakelite objects, never use a power screwdriver. We recommend that you predrill the bracket, place suitable dowels on it and finally use a screwdriver to fix the screws. Carefully make the last turns of the screws.

A reciprocating circuit is an electrical circuit that allows a lamp to be switched on or off from two switches, for example, a switch at each end of a corridor for the same lighting point. This mounting principle is recommended for parts with two inlets.

A two-way switch can be installed if you use 1 or 2 switches for one lamp. Supplied without back cover. To be ordered separately.

Technical description

SKU switch.002.002
EAN code 4051094841983
Material bakelite
Colour black
Depth 4,9 cm
Diameter Ø 6,2 cm
Origin Europe
Marking CE
Voltage 10 AX - AC 250 V
Protection marking IP20
Amperage 10 A
  € 39.00