// Banner We are open

zangra says

This collection of surface-mounted sockets and switches is a reproduction of historical models that have been brought up to current safety standards.
The 2.5 mm thick bakelite monoblock case guarantees you a superior quality product. Indeed, bakelite is a solid, lightweight, highly heat-resistant and electrically non-conductive material.
Please note that during assembly, the wiring and fixing from the inside is done directly on your wall. When mounting on a flammable support, be sure to close the back of the bakelite block with a "mounting plate" sold separately. It must then be drilled at the points indicated by the cutting line.

When assembling bakelite objects, never use a power screwdriver. We recommend that you predrill the bracket, place suitable dowels on it and finally use a screwdriver to fix the screws. Carefully make the last turns of the screws.

A changeover switch is a quadrupole that crosses two power lines. It is mainly used to increase the number of orders for a two-way circuit. It also makes it possible to reverse the direction of rotation of a DC motor. Its functionality can be achieved by means of two mechanically coupled reversers.

Also known as a cross-point switch or matrix switch. If you use more than two switches for one lamp, any additional switch needs to be a crossbar switch.
Example: 4 switches for one lamp (2 two-way switches & 2 crossbar switches are used). Supplied without back cover. To be ordered separately.

Technical description

SKU switch.002.005
EAN code 4051094868935
Material bakelite
Colour black
Depth 5,3 cm
Diameter Ø 6,2 cm
Origin Europe
Marking CE
Voltage 10 AX - AC 250 V
Protection marking IP20
Amperage 10 A
  € 53.00