The shade of your ceiling lamp in raw brass, opaline?

Brass light fixture for minimalist interiors

Add a touch of elegance to your home with our minimalist brass lamp. Its glass lampshade casts a soft, warm light, perfect for modern or classic décor.
Usable as a wall or ceiling light, compatible with an E27 bulb, and available in several colour finishes.

Brass is an alloy consisting predominantly of zinc and copper. Brass is significantly more yellow than pure copper and bronze. It is a material that has always been appreciated for its resistance and its colour close to that of gold.
Brass resists moisture and does not rust, and is easy to maintain. Over time, the glossy surface will tend to oxidize naturally and become verdigris (greyish-green). This is a natural process of brass ageing and does not constitute grounds for complaint or is something covered by the warranty.

Our glass globes and shades are the perfect match for zangra's porcelain, bakelite and brass lamp collections. The shades are available as spare parts, allowing you to extend the life of your lamp if a globe needs replacement.
Any bubbles or parting lines on our products are proof of the real craftsmanship that goes into the manufacturing process.

Browse our extensive collection here:
* globes/shades size S: Ø74.5mm screw thread
* globes/shades size M: Ø84.5mm screw thread
* globes/shades size L: Ø100mm neck
* globes/shades size XL: Ø120mm neck

At zangra, we believe that glass should be re-inserted into our daily lives. Glass plays an essential role in preserving our environment. Its responsible use and sustainable life cycle make it a valuable ally in the fight to protect the ecology. One of the most commendable features of glass is its ability to be recycled almost indefinitely. Unlike other materials that lose their properties during recycling, glass can be melted and remolded several times without altering its quality. This reduces demand for natural resources, saves energy and minimizes waste.

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

E27 stands for the type of the fitting of a lamp. E27 stands for a 27 mm diameter thread. "E" stands for Edison thread. So you always have to put an E27 light bulb in a fixture with an E27 fitting. E27 is the standard in England and most European countries.
The early light bulbs (remember them?) had a similar screw thread.
Be careful though, because there are also countries where E26 bulbs are the norm (for example in the United States).
If you would like to know which standard applies in your country, check out this page.
Check out here the complete collection of E27 light bulbs by zangra.

This lamp comes with a Ø 7 cm x 6 cm flush-mount box. However, the installation of the lamp does not necessarily require the use of this flush-mount box.
If you choose not to use the flush-mount box, it is imperative that the diameter of the hole on the mounting surface be at least 2 cm to allow the fixation system (screws, nuts, and accessories) to be inserted.

No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Material	Brass, Glass
Colour	Gold-coloured
Height	5 cm
Diameter	Ø 8,9 cm
Made in	Europe
Designed by zangra in	2021
Marking	CE
Lamp holder type	E27
Lightbulb type	max Ø 6 cm
Maximum wattage	max 6 W LED
Voltage	AC 230 V
Frequency	~ 50 Hz
Protection marking (IP)	IP21
Safety class	Class 1
Interaxial distance	6 cm
Fixation screws included	no
Type of luminaire	Ceiling light, Wall light
Lightbulb included	No
Glass screw size	Ø 84.5 mm - glass M
Flush-mounting box included	Yes
Technical drawings
Installation instructions
Protection's indice